 |
| No items matching your keywords were found. |
Diffused Leds
65" LED TV – Our Helping Guide for the Right Choice
These days a 65" LED TV seems to be fashionable. These are the category of HDTV are rapidly gaining popularity because of the fact that they are built using LED (Light Emitting Diode) backlight to illuminate the screen rather than the traditional fluorescent lights found on other LCD TVs. This makes a difference - better color, brightness and contrast is super sleek and slim more flat panel displays in appearance.
There are now available information in the web that will help you understand this technology and what is available on the market, so you can be sure you make the right choice.
It is important to know that there are two main types of LED TV, which differ in the way the LED backlight is, such as fluorescent lamps of different styles of traditional liquid crystal display. These models have a number of LEDs on the rim of the screen panel that creates a uniform light shining in a multi-panel diffuser. Because the lighting elements along the edge and not behind the screen, allowing a very sleek and stylish design. This type of television has its LED lighting elements mounted on the back of the screen and use a diffuser panel backlight uniformity. Although this is not true of all models offer many "local dimming," which lets you turn off or reduce certain elements of lighting, while others are at full strength which allows a quality image excellent contrast -. An improvement on earlier versions of LED TV that have suffered low levels of black technology goes by different names depending on suppliers -. other evidence of this feature is "intelligent dimming" and light InFocus. Without this feature, LCD TVs are generally very similar to LCD TV.
TV backlight LEDs are currently available in sizes, 65" LED TV tend to cost more than traditional versions of LCD TVs, even if they are still popular with the best possible picture quality. It have the perfect color accuracy, LCD backlight color is superior. The second type of LED, which has white backlight always offer an impressive display, however.
As mentioned above, although this is usually not a problem for the average viewer, it was noted that the LED backlight TV uneven in some areas causes the screen to be better informed than others. local television technology to control LED dimming the backlight exposure to remedy this - the image quality will be improved models of 65" LED TV before because, little by little in some areas, can create deeper blacks and better detail in dark scenes.
I must say that the lack of LED technology is that even the best LCD TV instead of suffering deterioration over a 30 degree angle from the center. This question has been greatly improved in recent years, however, and now boasts a viewing angle much better than plasma TVs: No
Most manufacturers specify the length of LED TV to about 100,000 hours. Although this type of TV backlight is not much of a roadmap as it is relatively new on the market, LED lights usually last long. Traditional LCD showed a slight change in color over time, while the LED lighting technology is said to suffer less damage in this area.
If you want to buy a 65" LED TV, the above information helps you make the right choice. As something important, it is crucial to shop around and then compare product mix. It is also wise to read many reviews on different brands, so you can find the model that suits your needs and excellent value for your money.
About the Author
I am a freelance writer for ten years.
LED diffuser details?
So I am making a costume peice that has LEDs in tracks down the back. I want to be able to diffuse the light to make the illumination along the tracks steady instead of in beams that are characteristic of LEDs alone. I was looking at frosted plastics, and I would prefer if they were flexible. Any suggestions?
I know nothing about sewing or costuming but I know LEDs...
That's going to be very difficult. Diffusers work best if they're a little distance from the light source. If the light source is right under them they don't have much to work with.
I'd suggest using a lot of small LEDs rather than a smaller number of large ones.
There are various ways of making flexible circuit strips that you could mount the LEDs and associated resistors on - they are actually flexible circuit boards, looking very much like flexible flat cable but with the copper exposed. Or if you don't mind a LOT of handwork, wires glued to a cloth strip, or to something like very thin and relatively flexible boning might work.
The diffusers, though.. check out a plastics store for any kind of flexible plastic sheeting, translucent but not transparent. You want stuff that is textured, not just "cloudy." If you can find stuff that is only textured, but transparent except for the texture, that might be ideal. You are looking for the texturing to catch and refract the light. Take a short LED strip and a battery to the store to see how the different stuff looks.
While you're there, look at the various diffuser plastic that's sold for ceiling fluorescent fixtures. There is a type that is clear but for an irregular pattern on the surface, with feature size in the 1 to 4 mm range. There's another type that is clear but has an extremely regular pattern of little tiny pyramids a few mm square. They are not flexible, so they're not suitable for what you're doing, but they will give you some ideas as to what to look for. (These plastics used to be quite the thing for "color organs" and similar lights-flashing-to-music effects.)
Also try the home improvement store. Look for shower curtain material and that sort of thing... passes light but isn't see-through. Again, you want something obscures via fairly large surface detail. Simple "cloudy" or matte finish won't work as well. The home improvement store will have the lighting plastic too.
The best bet would probably be two layers of *different* stuff on top of the LEDs, each free to move independently.
Maybe a lengh of clear plastic tubing, filled with small clear glass beads... but I doubt it would be flexible enough. Maybe a bunch of small clear glass beads sewn to a flexible clear plastic backing, with the LEDs on the "beads" side... or maybe on the backing side. (But that would be a LOT of beading... ick. Maybe you can find something already like that.
Take your LED strip and battery to a fabric store - try different sheer fabrics. Again, two layers of different stuff, each free to move independently, will likely give a better effect.
Remember, too, that everything you put in the way of the LEDs also cuts down their brightness.
(Oh, and one bit of advice: You can't filter colored LEDs to some other color! Putting a blue filter in front of a green LED just gives you much dimmer green. Whatever color the LEDs are, that's what you have. White LEDs can be filtered but only in surprising ways, as most of them don't emit full-spectrum light.)
5x5x5 led cube with blue diffuse leds